Tools

With today’s lightweight components, torque wrench use in the shop is no longer an option — it’s a must for every mechanic. The TW-6.2 is a high-quality, ratcheting, click-type torque wrench that accurately measures and applies the proper amount of torque to a component’s threaded fastener(s). Designed for higher torque settings for repairs and installation in the bottom bracket, cassette lockring and other areas that use a higher torque settings. For lower torque setting, see the TW-5. Comes with its own protective case. - 10–60 Newton meter range (88–530 Inch Pounds) - Adjustable in 0.25 Nm increments - Ratcheting 3/8" drive - Reads and registers for both left hand and right hand threading - Dial-adjust system allows desired torque setting to be preset - Calibrated to be accurate to +/- 4% - Length: 36.2cm (14.25")

With today’s lightweight components, torque wrench use in the shop is no longer an option — it’s a must for every mechanic. The Park Tool TW-5.2 is a high-quality, ratcheting, click-type torque wrench that accurately measures and applies the proper amount of torque to a component’s threaded fastener(s). With a range of 2-14Nm, the TW-5.2 is designed for the lower torque settings that a shop or consumer would use for proper seat post, seat clamp and handlebar / stem applications. Comes with its own protective case.

Engineered for fit, function, and leverage, these L-shaped shop-quality hex wrenches are a must have for every workshop. - High-torque, industrial steel wrenches - Straight hex shaft on the short side, ball end on the long side - Includes 2, 2.5, 3, 4, 5, 6, 8, and 10mm - Comfortable, ergonomically designed nylon handles fit perfectly in your hand - Durable wall/pegboard mount tool holder allows easy access and organization

The new 8-Bit System is a group of multi-tools designed to work together to solve most trailside fixes. They are lightweight, strong, versatile, and small enough to fit in a jersey pocket or riding tool wrap. Three multi-tools begin the 8-Bit System: 8-Bit Chainbreaker + Utility Knife Multi-Tool, 8-Bit Tire Lever + Rim Dent Remover Multi-Tool, and 8-Bit Pack Pliers. A total of 22 functions between the three tools will keep you rolling to the next town or trailhead. - 17 functions: spoke wrench; valve core wrench; flat head #3.5 and Phillips #2 screwdriver bits; 2, 2.5, 3, 4, 5, 6, and 8mm hex; and T10, T25 Torx-compatible bits; install and remove master links; clear tire sealant clogs from valve stem; tighten valve stem lock nut - Magnets keep all bits in place - Ball detent swivel head helps access hard-to-reach places - Handle doubles as breaker bar for extra torque when head is bent - 8mm hex bit tested to over 40 Nm torque - Pliers works with 9-, 10-, 11- and 12-speed master links and chains (not compatible with Campagnolo 12-speed chains) - Master Link storage is compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links (not compatible with Connex Links by Wipperman)

A compact, efficient way to hold flat fixing essentials so you can get back on the bike quickly. The Pro Flat Pack has everything you need to fix a flat and get back on the bike quickly in an aero, easy to grab package. This all-in-one kit provides essential items needed to fix a flat tire with additional pockets for money and ID, plus extra soft, padded materials to ensure you won't be bothered by the poke of a tool while it's stashed in your back pocket. - Tight fitting, stretch neoprene material zips open for easy access - All the items you need to fix a flat tire - Includes Air Rush Elite, CO2‚ inflator, two 16g CO2‚ cartridges, and a padded bag - Reusable hand insulation sleeve, vulcanizing patch kit - Room in the bag for ID, money, keys, and more

Securely stow a multi-tool, chain breaker, and master link in your fork’s steerer tube for quick and easy access when you need it. Securely stow your essential trail toolkit in your fork’s steerer tube with this clever integrated storage solution. The compression fitting replaces a traditional MTB fork's star nut and keeps an included multi-tool and more cleanly out of sight, yet always at the ready—and it doesn't require you to thread your fork! Product details - Easy tool access for quick trailside repairs - Bolted compression system securely holds tool and carrier - Compression install replaces the star nut fitting with no need to thread fork - Simple install with two bolt lengths and included spacers for customizing fit - Includes BITS Multi-Tool with hex keys, screwdriver, chain breaker, and storage for quick links - 2, 2.5, 3, 4, 5, 6, and 8mm hex along with T25 and flat-head screwdriver - Compatible with MTB forks with threadless headsets and non-carbon steerer tubes - Not compatible on forks with oval internal steerer tube shapes like the Fox 38

A compact yet capable tool with an array of hex, torx, spoke, screwdriver, and chain tools. Make road- or trail-side adjustments and fixes with confidence using 1 of 15 integrated tools packaged in the slim and easy-to-carry design of Bontrager Pro Multi-Tool. A vast array of hex, torx, spoke tools and screwdrivers will have you back on your back in no time —and it all packs down small in a magnetic case for easy carrying in a pocket or bag. Product details - Slim magnetic case doubles as handle for all tools, including chain tool - 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm, #2 Phillips, #1 Flat, T25 and 0, 1, 2, 3 spoke - Lightweight, durable design stows nearly anywhere - Chain tool compatible with 8, 9, 10, 11, 12-speed drivetrains - Integrated bottle opener for post ride refreshments

A compact multi-tool that is designed for integrated storage in compatible Trek road frames. Compact and easily stowed The BITS Integrated Multi-Tool is a compact multi-tool that is designed for clean, integrated storage into compatible Trek road bike frames. The small but smart design features hex tools from 2-8mm along with a T25 Torx, and flathead screwdriver. The ergonomic design makes the tool as easy to use as it is to carry. Product details - Designed for secure integrated storage in the new Domane with storage door - CNC-machined keys for lightweight durability - 2, 2.5, 3, 4, 5, 6, and 8mm hex along with T25 and flat-head screwdriver - Slim profile makes it easy to pack on any ride - Ultralight aluminum alloy design

Park's I-Beam Mini Fold-Up Hex Wrench/Screwdriver/Torx Set with Chain Tool includes 1.5, 2, 2.5, 3, 4, 5, and 6mm Allen wrenches, a socket 8mm Allen, a regular screwdriver, a T25 Torx tool (for disc-rotor bolts), a tire lever, spoke wrenches and a chain tool. The I-Beam conveniently fits in pockets and packs, too.

The Masterlink Pliers is a multi-tool developed to provide functions that are not on a typical multi-tool. It is designed to be light and compact so you can carry it with you. This tool serves as a tire lever, valve core remover, valve stem lock nut wrench, and master link pliers. It also provides storage for two master links so you will always be prepared on the trail. Magnets hold the master links securely in place and self close the tool. - Weight: 38.5g - Size: 116 mm x 20 mm x 9 mm - Material: 7075-T6 aluminum - 9, 10, 11, and 12-speed master links and chains - Compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links

A fine addition to your toolbox GENUINE REPLACEMENT PARTS Shine some light on the subject. PRODUCT DETAILS - Professional-grade pocket-sized LED inspection flashlight - Focused beam for inspection of frames and components or to aide in cable routing - Uses one AAA battery (included) with 2.5hr runtime - Versatile clip allows for easy pocket storage or attachment to a hat's brim - Simple on-off switch for ease of use

Precision CNC machined aluminum tool for the installation and removal of 12-notch external bearing bottom brackets. Anodized for easy identification and featuring a ratchet/torque wrench compatible 3/8" drive. - 46mm 12-notch OD cup - Race Face® Cinch™, Rotor® BSA30, Zipp® Vuma™, Hawk Racing™ BB3086™, and more

Cleans bicycle chain quickly, easily, and effectively — without the hassle and mess of removing the chain from the bike. The Cyclone uses a large solvent reservoir, hundreds of rotating bristles, and a two-step cleaning process to get chains really clean, improve shifting performance, and extend the life of the chain and other expensive drivetrain parts. - Works with all multi-speed bikes (5, 6, 7, 8, 9, 10, 11, and 12-speed) as well as some single-speed models and e-bikes - Strong magnet at the bottom of the fluid reservoir holds metallic particles scrubbed from the chain - Special wicking sponge draws solvent from the chain as it exits, minimizing drips and mess - Sturdy handle makes the Cyclone easy to use and control - Holds 2 fluid ounces (59ml) of solvent

Park's Needle Nose Pliers are professional quality, 6-inches long, and made from forged, heat-treated chromoly steel. For ease of use they have a hidden spring, cutting jaws and 5 different gripping and crimping areas. Plus, they have soft-touch, dual-density handles for an excellent grip.

Park's Mini Chain Brute Chain Tool goes anywhere and features a V-shaped handle, a super-strong replaceable pin, and fine threads to make chain removal and installation a breeze. The CT-5 works on any derailleur chain, including Shimano Hyperglide and 9-, 10-, and 11-speed. It works for loosening tight links, too.

High-performance bicycles require precision during setup and adjustment. The Preset Torque Wrench provides secure adjustments while preventing damage to lightweight bars and forks from over-tightening. Product details - Tools are pre-set to 5Nm or 6.8Nm - Check component tightening specifications before using - 4mm and T25 keys are non-removable

The BBT-22 is a shop-quality tool for installing and removing Shimano and ISIS Drive splined 20-tooth bottom bracket cups. Made from investment-cast steel, the BBT-22 ensures maximum engagement with the bottom bracket cup. It can be used with a 3/8-inch drive torque wrench, a 3/8-inch ratchet driver, a 32mm wrench, the Park FRW-1 Freewheel Remover Wrench (sold separately), or a 1-inch wrench.

Park's Hydraulic Brake Piston Press is used to set or reset the piston(s) inside hydraulic disc brake calipers during installation, maintenance and repair. Just push it into the caliper to wedge the piston into place. It's made of tough tool steel with a comfortable and oversize rubber handle for a great grip.

Get the most from your Bontrager Switch Lever thru axle system. Product details - Original equipment replacement lever for Bontrager Switch Flip thru axles - Can be kept inside the thru axle or left off the bike to save weight - Lever is held securely by internal O-ring on the thru axle

If you have a bike with disc brakes, you'll want Park's Rotor Truing Fork. It allows you to gently adjust bent and damaged disc-brake rotors. It's made from high-quality steel and features 2 laser-cut slots for precise adjustments and a vinyl handle for comfort and control.

The ultimate trailside companion. These high tensile steel multi-tools feature a precise fit and finish and side grips for a secure handhold even with gloves on. The m10 includes: Hex wrenches: #2, 2.5, 3, 4, 5, 6, 8 Screwdrivers: Phillips #2, flat #2 Torx: t-25 Length: 89 mm Weight: 124g Warranty: Lifetime

The TL-6.2 is a composite covered, steel core tire lever that provides smooth, scratch-free operation and superior strength to help remove even the tightest tires. Newly upgraded with a tougher, more slippery material and a protruding steel tip to more easily and securely engage the tire bead. A perfect size (5"/12.7cm) to either take-along, or use as an everyday shop lever. Set of two.

Refined functionality The Bontrager Elite Multi-Tool combines smooth style with practical design. This elegant tool features a compact design that easily packs away yet provides all of the essential tools to keep your bike tuned and running smoothly. Key features - CNC-machined keys for lightweight durability - 2,2.5,3,4,5,6, and 8 hex along with Phillips, flat and T25 - Slim profile makes it easy to pack on any ride - Ultra-light aluminum alloy design

Park's Home Mechanic Pedal Wrench is great for your home workshop and event tool box. This top-quality 15mm pedal wrench provides the leverage you need to remove stubborn pedals. It's made to last from heat-treated steel, and the handle has a vinyl grip for comfort.

Professional quality T-Handle star-shaped wrench built for speed, efficiency, leverage and a perfect fit. - Carefully selected combination of Chrome Vanadium and S-2 tool steels - Unique anodized aluminum Speed Spinner makes running long bolts in and out quick and effortless - Sliding T-handle creates increased leverage and multiple access positions

Our Steel Core Tire Levers have a hardened CRV tool steel center to prevent flex and breakage. And when getting your tire off is an extra big chore, each lever has a spoke attachment to help you get maximum leverage and secure removal. Add to this an additional polymer tab to properly spread hydraulic disc brake pads and you have a true roadside or trailside 2-in-1 companion. Our Steel Core Tire Levers make inferior tire removal tools a thing of the past. Available separate, or found in our Ride Prep and Team Edition Tool Kits. - Hardened CRV tool steel core prevents flex and breakage - Spoke hook on each lever - High-density polymer protects your rim and promotes smooth tire bead removal - Thin-bladed tip maneuvers under even the tightest tire bead - Wide and reinforced body promotes confidence even with the most challenging tires - Extra-long polymer tab to properly spread hydraulic disc brake pads - Slide-fit system keeps the tire tool pair securely together - Found in our Ride Prep and Team Edition Tool Kits

The CC-4 is a drop-in style gauge that measures bicycle chain wear. The laser cut CC-4 accurately measures a long section of chain and strategically comes in contact with the chain in three places, quickly and easily taking the guesswork out of knowing when chain replacement is necessary. A worn chain will cause poor shifting as well as accelerate drivetrain wear. The tool works on any 5 to 12-speed derailleur chain (including SRAM AXS) and is designed to accurately indicate when a chain reaches .5% and .75% wear, the points at which most chain manufacturers suggest replacement.

Park's Compact Crank Puller is used to remove Shimano Octalink, ISIS Drive and square-taper cranksets. It includes 2 rotating tips (16.3 and 11.3mm) to make the job easy. This is a great tool for your travel and home tool kit.

RockShox 30mm Seal Kit

Everything you need Be prepared for roadside adjustments and minor repairs with the Bontrager Comp Multi-Tool. This simple tool features a compact design that easily packs away yet provides all of the essential tools to keep your bike tuned and running smoothly. Key features - 2,2.5,3,4,5,6,and 8 hex along with Phillips, flat and T25 - Alloy sides for a sleek lightweight design - Material: Steel