Tires/Tubes

- Shim adds support to Presta stem used in a Schrader rim

The Air-Liner is a high-quality polymer insert that replaces a portion of the air volume in the tire. This trait, combined with the shape, provides a tunable system that enhances your ride performance. The Air-Liner sidesteps the traditional compromise of stability vs. grip and allows your tires to remain stable, grippy, and controlled, even at low pressures. The Air-Liner is designed using a round cross-section with channels on the top and bottom. The top channel provides room for the tunable air chamber that sits directly beneath the tire tread. Upon impact, the corner edges of the channel flex first. This allows the tread to remain flexible, which increases traction without sacrificing impact resistance. The bottom channel allows for easy fine-tuning of the air chamber and allows for full compatibility of all valve core styles. The round cross-section shape mimics the natural shape of the tire and supports a greater contact area within the sidewalls of the tire casing. Side-to-side tire stability is increased, yet the tread remains soft and grippy. This improves cornering, climbing, and braking performance. - Protection: Both wheel and tire are protected by the Air-Liner insert. By cushioning impacts from within the tire, your expensive rim remains protected while eliminating flats caused by rim-strike impacts. - Control: The Air-Liner insert replaces air volume in the tire. The reduced air volume allows the tire to compress and rebound in a more controlled manner compared to standard tubeless systems. - Performance: Side-to-side tire stability is increased, yet the tread remains soft and grippy. This improves cornering, climbing, and braking performance. - Durability: This highly durable polymer material has been tested to a projected life of 2000 hours under normal riding, or 1 full hour of run-flat downhill use under a typical rider. - Air-Liner increases control, durability, performance, and protection of both tire and wheel. - Sold individually (single tire). Compatibility - Small: 1.9 – 2.25-inch wide tires - Medium: 2.25 – 2.5-inch wide tires - Large: 2.5 – 2.7-inch wide tires - X-Large: 2.7 – 4.0-inch wide tires

Don't let flats stop your ride! The legendary combination of durability, protection, and run-flat performance of Vittoria Air-Liners, made for your favorite tubeless-ready road tires! The Vittoria Air-Liner system provides unmatched bump compliance and impact protection, while ensuring bead lock at lower pressures. In the event of air-loss, the Vittoria Air-Liner Road system is designed for run-flat use. The insert increases the safety of your tubeless set-up by keeping the tire in place even in case of puncture - No risk to ride on the wheels! The Vittoria Air-Liner Road system is compatible with all tubeless road tires on the market. The lightweight material absorbs no sealant, while the proprietary Vittoria tubeless valves eliminates valve clogging. Whether you are training, touring, exploring, or racing, the Vittoria Air-Liner Road system will provide peace of mind and protection for the ride ahead. The Air-Liner Road bag contains: - One Air-Liner Road insert - Two Multiway valves Sizing recommendation: - Small, 700 x 23-26mm - Medium, 700 x 27-29mm - Large, 700 x 30-32mm

Speed and reliability for riders pursuing a new performance level Corsa N.EXT is the exciting new addition to the Corsa family. Designed to satisfy the requirements of enthusiast cyclists who clock up the miles on long and demanding weekly rides, Corsa N.EXT combines Vittoria's peerless knowledge of racing performance with the durability of a long-lasting nylon casing that uses a unique Silica and Graphene compound for improved rolling efficiency, grip and longer wear-life. To increase puncture protection, the central section of the casing features 3 layers of nylon as well as an additional puncture protection belt. Corsa N.EXT is the first road racing tire to feature a QR Code—printed on the tire hot patch—for easy access to useful technical information about the tire. Racing inspired speed and feel, with the everyday durability of nylon construction - New combination of Silica and Graphene compound for improved rolling efficiency, grip and longer wear-life - Nylon casing provides durability, for daily racers who want to raise the bar of their performance relying on a long-lasting tyre - Proven tread design used by Vittoria teams in the World Tour

Vittoria's Evolution II is versatile and reliable—the choice for daily recreation and commuting on all types of surfaces. It's multi-surface tread grips all the time, regardless of where you ride, offering tremendous confidence and versatility. Vittoria's puncture-resistant belting lets you ride day after day without worrying about flats. - Multi-surface tread - Wire-bead - 35-58 PSI - 790 grams (26-inch), 840 grams (29-inch)

- Fully removable aluminum valve - Anodized red color - Intended for use with 320 tpi Vittoria tubular tires, Rubino Pro inner tubes, and latex inner tubes - 42mm, 60mm, 80mm, and 110mm lengths - Sold as a pair

At a featherweight 23g, the super-compact (when rolled up) S-Tubo-Road tubes stand out with very low rolling resistance which outpaces standard rubber tubes. With a 78% smaller packed size and the same puncture resistance as standard tubes, the S-Tubo-Road is the perfect choice as a spare and can be the crucial factor when you’re riding long and hard. - Ready for disc brakes (not suitable for rim brakes)

OS20 diameter BMX race tires designed to balance traction and low rolling resistance with a block-designed center tread. - CYLEX 120 TPI superlight casing - UTC rubber compound - Patterned sidewall adds abrasion protection while maintaining casing suppleness - OS20 utilizes a larger diameter tire design to increase rolling efficiency Compatibility: - Must use with specific OS20 frames and rims, however many forks will accept this tire sizing currently - ISO Diameter = 451mm - NOT compatible with standard 20-inch BMX rims (ISO Diameter = 406mm)

- Size: 27.5 x 2.0 – 2.25 - 4mm wall thickness in the tread area and 2mm in the rim area - ISO Diameter: 584 / 650b / 27.5" - ISO Width: 52mm, 53mm, 54mm, 55mm, 56mm, 57mm, 58mm - Tube Compound: Butyl - Valve: Long Schrader - Valve Core: Removable

- Size: 29 x 2.1 – 2.3 - 4mm wall thickness in the tread area and 2mm in the rim area - ISO Diameter: 622 / road / 29" , 630 / 27" - ISO Width: 54mm, 55mm, 56mm, 57mm, 58mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Length: Short 32-40mm - Valve Shaft: Threaded - Weight: 681g

- ISO Diameter: 438 , 451/ 20 x 1-1/8", 20 x 1-1/8" - ISO Width: 28mm, 29mm, 30mm, 31mm, 32mm, 33mm, 34mm - Labeled Size: 20 x 1-1/8 - 1-3/8 - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded - Weight: 98g

- Labeled Size: 24 x 1-3/8 - ISO Diameter: 540 / Wheelchair - ISO Width: 32 – 40mm - Tube Compound: Butyl - Wall Thickness: 0.9mm - Shaft Type: Threaded - Valve: Presta Short 32-40mm - Valve Core: Removable - Weight: 122g

- ISO Diameter: 507 / 24" BMX - Tube Compound: Butyl - Wall Thickness: 0.9mm - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded Note: This product may have different packaging than pictured with a slightly different labelled size. Rest assured, the size range on the package will have the same or a broader functional range as the listed sizing of the product you ordered.

- Size: 650c x 18 – 23 - ISO Diameter: 571 / 650c - ISO Width: 18mm, 19mm, 20mm, 21mm, 22mm, 23mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded - Weight: 89-92g

- Size: 700c x 18 – 23 - ISO Diameter: 622 / road / 29" , 630 / 27" - ISO Width: 18mm, 19mm, 20mm, 21mm, 22mm, 23mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded - Weight: 100g (32mm), 101g (48mm & 60mm), 103g (80mm)

Tannus Armour is the ultimate in tire protection and performance for all levels and styles of riding. Sitting between your tire and inner tube, the Tannus Armour provides 15mm of puncture protection on the top, as well as 2mm of sidewall protection from sharp objects and rocks. Whether you are a city biker, adventure tourer or prefer the off-road, downhill or gravel trails, Tannus Armour gives you increased grip and vibration dampening for a smoother, more comfortable and enjoyable ride. - Patented Aither Technology; Aither is a multi-cell foam compound that forms the structure of the Armour

Surly Inner Tube to fit a wide range of plus-size and fat bike tires. - Labeled Size: 26 x 3.0 - 4.8 - Weight: 310 g - Valve Core: Removable - Shaft Type: Threaded - ISO Width (mm): 76mm–100mm - Tube Compound: Butyl - ISO Diameter: 559 / 26-inch MTN - Valve: Presta Short 32-40mm

- Balloon tire with grooved tread - Large air volume for added shock absorption - Wire bead - Size: 26 x 2.125

- Street/vert tire with bead-to-bead, siped, lightly grooved tread - Wire bead - Size: 26 x 2.4

- Tire with medium-depth, directional tread suitable for road, light trail use - Size: 22 x 1.75

- Entry-level BMX-style tire with sturdy casing for longevity - Wire bead - Size: 14 x 2.125

- Entry-level BMX-style tire with sturdy casing for longevity - Wire bead

- Entry-level BMX-style tire with sturdy casing for longevity - Wire bead

- Recreational tire with raised center for low rolling resistance - Fits older road bikes - Size: 27 x 1 1/4

- Recreational tire with raised center for low rolling resistance - Fits Schwinn "lightweights" and older British club bikes - Size: 26 x 1 3/8

- Valve type: Presta - Valve core: Removable - Butyl rubber - Wall thickness: 0.9mm

- Valve type: Presta - Valve core: Removable - Butyl rubber - Wall thickness: 0.9mm

- Valve: Presta - Valve core: Removable - Butyl rubber - Wall thickness: 0.9mm

- Valve type: Schrader - Valve core: Removable - Butyl rubber - Wall thickness: 0.9mm

- Valve type: Schrader - Valve core: Removable - Butyl rubber - Wall thickness: 0.9mm